Joined: Aug 10, 2016
| Posted: 2018-05-03 22:58|
Insect mites: The reason is related to the floor selection. In order to prevent worms, the first choice is to purchase floors that have been produced through a steam kiln jet steaming process. Although the price is relatively expensive, all the eggs in the wood have been killed; the second is to carefully select the keel, and there are wormholes or bark. Do not use it.
Quilting: Some floorboards have been spread over several days and there has been a large gap between the slats. This is mostly related to the high moisture content before the laying of the floor, which shrinks due to the high temperature or air drying in the room. Note that the moisture content of the floor prior to laying should be in the range of 8% to 13%, and be timely oiled after being laid.
Sound: Due to the poor quality of the floor laying, people will make a loud noise when walking on the floor and they will feel very uncomfortable after hearing it. To this end, it should be noted that the keel and the ground, the floor and the keel bond firmly, the number and length of nails appropriate. At the same time, to prevent the keel spacing is too large or the moisture content is too high, otherwise drying and shrinkage after laying will also have a certain impact.
Dirty board: Refers to some floors painted, giving people a dirty "gray" feeling, and some even the footprints are clearly visible. To prevent this from happening, it is important to pay attention to the fact that the surface of the board after polishing is kept clean.
Facial: Using the slats of the same tree species, the colors will also be different. If it is not properly laid, it will easily show a "face". When using lacquered wood floors, especially when the species is extremely variegated, you should consider the choice and deployment of the slats so that the color of the floor changes from shallow to deep, or from shallow to deep. "Recycled Flooring Ideas,Low Maintenace But Beautiful Fencing,Low Price Wall Panel Waterproof Wpc Decking "