Joined: Aug 10, 2016
| Posted: 2018-05-04 00:27|
The Huawei CC08 H301HSL board provides two V.35 ports and two FE1 ports at N x 64 kbit/s (N = 1 to 31) speeds. The board has the function of locking different clock sources and can use the clock provided by the motherboard or phase-locked clocks extracted from the FE1 port.
The board is compatible with user board slots such as ASL and DSL. The V.35 port can work in the DCE or DTE mode. The port clock mode is internal, external, or slave mode. The FE1 port can be used to connect to a remote data service unit or when the V.35 port rate is greater than 384 kbit/s, the data is transmitted using the FE1 port without using HW resources.
Huawei HS08 single board supporting cable for CC08 is inserted in the user's box and the analog cable is used. The first V.35 port and the first FE1 port lead from the upper HEADER, and the second V.35 and second route The FE1 port leads from the lower HEADER header.
At present, only V.35 ports are available on the cable. The cable has one AMP head and one M34 female cable with a cable length of 15 meters.
MICROWAVE LINKS HIGH POWER MICROWAVE LINKS
Cisco Catalyst 3560 Series Switches Router Switch
Du Huawei Gpon FTTH Du Alcatel Gpon FTTH